Residential fence panels
Bekafor® Classic is a rigid panel that protects house and garden in a classic way. This residential fence will offer to your property a great look.
- High longevity
- Easy installation
- Classic design
The panels have a width of 2000 mm and are available in a range of heights from 630 till 2030 mm. The panels have vertical barbs of 30 mm that can be placed at the top or at the bottom (place the barbs at the top for panel heights ≥ 1530 mm).
The horizontal curves give the panels extra rigidity.
Mesh sizes are 100 x 50 mm.
Wire diameter horizontal wires: 4.5 mm
Wire diameter vertical wires: 4 mm
Bekafor Classic residential fence can be installed with metal Bekaclip posts (diam 48 mm). The panels can be easily fixed to the posts by making use of the special Bekafor collets.
To complete your Bekafor Classic residential fence, you have the possibility to equip it with single and double Bekafor Classic gates & single Bekafor Essential gates.
Several accessories are available for:
- Fixing a panel directly to a wall (wall fixators)
- Installing posts on a concrete floor or wall (base plates)
- Installing panels in an angle (corner clips)
Infills available to create privacy:
- Collfort (wooden slats)
- Screeno Line (PVC slats)
Coating technique and colours
Panels are made out of galvanised wires. A pre-treatment process guarantees a perfect PVC-coating adhesion to the product surface.
The posts are galvanised inside & out (min. coating 275g/m², both sides together), in accordance with Euro standard 10326. Afterwards, an adhesion coating is applied and finally, the posts are PES coated (min. 60 micron).
Green RAL 6005 - Anthracite BF7016M
Assortment Bekafor Classic
W x H in mm
Recommended posts lenght
|Number of collet per Bekafor-Bekalip posts||Bekafor Click posts|
|On base plate|
2000 x 630
|No accessorie needed|
2000 x 1030
2000 x 1230
2000 x 1530
2000 x 1730
2000 x 2030
*Not available in white RAL 9010