BEKAMATIC SC
Automatic cantilever sliding gate

Benefits

Large Range
The range is going from 3m opening width to up to 12m opening width. The possible heights are variable between 1m and 2.4m. Other sizes are available on request.

Safety
The Bekamatic SC gates are state of the art in terms of safety. All gates are equipped with 5 pressure strips, warning light, two pairs of photocells. The safety distance between the bars with Robusta infill is 110mm, to prevent climbing through. The roller system is integrated in the underbeam of the date and is also avoiding accidents.

Complete System
The Bekamatic SC sliding gate can be easily combined with an attached pedestrian gate and with all common Betafence fencing systems.

Harmony
Bekamatic SC sliding gates completely harmonize with all styles of architecture.

Operation Security
Bekamatic SC sliding gates are extremely rigid due to the chosen profile sections and the welded construction.

Tension System
Bekamatic SC sliding gates are foreseen with an ingenious tension system integrated into the frame of the gate. This tension system guarantees a perfect stable and inline operation at all times.

Pre-assembled
Bekamatic SC sliding gates are delivered completely pre-assembled on-site, and ensure, in this way, very quick and smooth installation on site.

Bekamatic with E145 Controller system

The Bekamatic automatic cantilever is always motorised and foreseen with the most advanced safety and security solutions. The motorisation is completely integrated into the guiding post of the Bekamatic gate. In this way, the motorisation is also protected to all vandalism and weather conditions. At the same time, the motor and controller are easily reachable for maintenance,  thanks to a cabinet door opening à 180°. In any case, the perfect solution for the most intensive and extreme conditions.

Bekamatic SC6000 line (with E145 controller)

A version which has proven his capabilities. A fixed opening speed of 12 m/min, all kinds of access control options are possible.

Gate wing

• Welded structure
• The dental strip is optional (from a height of 2 meters onwards)
• Guiding wheels are installed on the upper part of the front frame, on both sides, for a perfect entering in the end post bridge
• Two roller sets integrated into the underbeam for vertical and horizontal guiding
• A roll to support the gate in open position
• Safety distance of 110 mm between the bars (for Robusta infill)
• Robusta, Nylofor, Securifor or Lamella* infill are possible

* max. 6 meters free passage

Guidance of the gate

Guiding posts and end posts have ground plates.

• The guiding post has two adjustable guiding rolls at the top and an integrated base plate for the installation of 1 set of guiding rolls that is situated in the underbeam.
• The universal guiding post is being used for both Bekamatic gates with underbeam 2000 or 2800.

Lock post

The lock post has a gate catcher mounted on top and is always foreseen with a base plate. Two different versions are existing:

• enhanced post for combination with big access control options (intercom or videophone), dimension 180x80 mm
• standard version with no access control options installed on that post, dimension 120x80 mm

Tension system

The frame of the Bekamatic SC automatic cantilever features a carefully engineered tension system which assures perfect alignment of the underbeam at all times.

Coating technique and colors

• Coating

Bekamatic gates are treated with the best coating techniques available: galvanized in and outside (min. 275 g/m², 2 sides combines). Finally, the gates are epoxy and polyester coated (min. 120 microns). We give 10 years guarantee on all our coatings.

• Colours

Green RAL 6005 - Green RAL 6009 - White RAL 9010 - Grey RAL 7030 - Anthracite RAL 7016 - Black RAL 9005
Other colours on request.

Motorisation

For the motorisation, the motor/reductor is integrated into the guiding post. This type of automation guarantees a perfect operation in the most extreme conditions. A mechanical locking system prevents the gate from being opened manually once the gate has been automatically closed

Controller E145
Betafence is using a high-quality steering unit. A control unit with microprocessor manages the general functions and contains the control logic. A separate unit contains the special functions for access control.

Manual unlocking system

A manual over-ride system disconnects the motor from the gate and permits manual opening and closing of the gate.

Safety

Photocells
The gate passage is controlled by means of photocells installed on the guiding post and end post. If the cells are activated, the gate will stop and open again. Optionally a heating system for the photocells is also available.

Pressure strips
The front of the gate wing is fitted with ASO wireless pressure strip. The guiding post of the Bekamatic gate is fitted with 4 inductive pressure strips: two at the front and two at the back side. Any contact with the pressure strips immediately stops and reverses the movement of the gate. At the street side, one of the pressure strips can be replaced by a Securifor panel system.

Security stop
Gates are equipped with a main switch (yellow/red) through which the power supply can be isolated.

Bekamatic sliding gate benefits is CE certified

Access control

The access control can be adapted to the special demands of the customer. A choice of multiple access control accessories are installed at the request of the customer: key switch, RF-remote control, proximity card reader, keypad, videophone.... Have a look to our related products for slidings gates

Installation support

Betafence proposes you to buy with your gate a full kit of drilling templates to ease the installation and win a lot of time. Thanks to these drilling templates kit, you'll be able to realise your concrete base where guiding and reception posts will be placed, without any mistake. Your anchor positioned, just wait for Betafence delivery truck which will install your gate directly on it.
This kit is universal, applicable to Robusta SC & Bekamatic SC sliding gates. It includes elements for guiding posts, lock posts and rear roller set. It's light and durable, made out of black plexiglass.