CREAZEN PANELS
The attractive fence which looks like bamboo

CreaZen panels specifications

The panels have a width of 2400 mm and are available in a range of heights from 1000 to 2000 mm.
The vertical square tubes are welded at both sides of the horizontal tubes, in a criss-cross way.

• The spacing between the vertical tubes is max. 110 mm
• Horizontal rectangular tubes: 40 x 20 mm
• Vertical square tubes: 20 x 20 mm

Bekafix Post

CreaZen panels are foreseen to be installed on Bekafix posts. These are tubular posts profiled in "h" shape with side sleeve on the left and right. Cross section of the post: 70x44 mm. Thanks to this specific profile, installation is very easy in all situation (slopes, angles, etc....). In the standard version, Bekafix posts are supplied with a specific cap included a hook, which is not necessary for CreaZen panels. Thus, and optionally, you can replace them with more aesthetics designed caps. Then will end your fence in a very elegant way.

Accessories

• Intermediate fixation clamp (plastic), with stainless steel nuts and bolts
• Bekafix base plates
• Corner fixators for angles (10° up to 180°)
• Closing caps for vertical tubes

Gates

CreaZen fences can be combined with CreaZen gates, available as a single and double swing gates:

• Single gate opening dimension: 1200 mm width
• Double gate opening dimension: 4000 mm width

Coating technique and colours

Coating

The welded CreaZen panels are hot dip galvanized and polyester coated. The Bekafix posts are galvanized inside/outside and also polyester coated.
Polyester thickness is minimum 60 microns.

Colours

Anthracite RAL 7016 
Other colours on request.