Swing gatesRobusta Medium Single and double Robusta® Medium swing gates with bar infill or double bar panels, that can be used with all kinds of fencing systems. These standard swing gates can be used for all possible configurations (left, right, inwards, outwards).
Assets:
- Robustness rigid construction
- Security with a secure closing
- High-quality coating
Flyer Robusta Medium 2D swing gates
Flyer Robusta Medium SQ20 swing gates
Robusta Medium SQ20
The frame of the Robusta Medium standard swing gates is manufactured from profile tubes: 40 x 40 mm or 50 x 50 mm with bars of 20 x 20 mm, welded at a distance of 110 mm.
Robusta Medium 2D
Frame out of square tube 40 x 40 mm.
Square posts out of a welded tube with PVC. With fence connection, enables the installation of all Betafence fencing systems. All corners are possible with the fence. Holes for hinges are pre-drilled.
When needed, and for gates equipped with 60x60 mm posts, you can buy our Baseplate, designed to feet these posts, and easy to install despite the hinges.
Lock system
Aluminium manual lock and handle. External secure built on lock system (see below our electric optional latch system)
Hinges
The adjustable hinges enable a flexible gate opening. Both inside and outside openings are possible.
Ground bolt
Double gates are standard delivered with a ground bolt.
Fence connection clips (Robusta Medium 2D)
The posts of the standard gates are foreseen with inserts to install fence connection clips to install the fencing to the gate (Fence connection clips not standard included).
Our Robusta Medium swing gates range can be equipped with an electric latch, available from stock (to be ordered separately). The latch is in silver colour and knob set is aluminium.
You just need to drill an additional hole for the power supply. Other drillings fit the system.
This electric latch system has been selected by Betafence for its high-end characteristics, and also because it can be adapted later on to the gate:
- Tested at 500 000 movements
- Resistance to pressure on the latch bolt à 300 Kg
- Easy fixing
- Corrosion-resistance: aluminium powder-coated housing
- Adjustable for wing frame profile 40, 50 or 60 mm
- Voltage 12-24V AC/DC
- Power 15W - Consumption: 12V-1.25A / 24V-0.62A
The system does not include the command system (button, ring bell, card reader...), but can be plugged to any of those.
Coating
Robusta Medium are galvanized followed by a polyester coating (min. 100 microns).
Colours
Green RAL 6005 - Anthracite RAL 7016
They are also available just galvanized, on specific request.
Robusta Medium standard gates are CE marked according to the European regulation: construction products regulations (CPR) (EU-305/2011) and type tested according to standard EN 13241-1 for industrial, commercial, garage doors and gates.
| Width mm |
Height mm |
Section gatepost mm |
Free passage mm |
Needed space mm |
|---|---|---|---|---|
| Single swing gate | ||||
| 1 000 | 1000/1200 | 60 x 60 x 2 | 1 030 | 1 150 |
| 1 000 | 1500/1700/2000 | 80 x 80 x 2 | 1 030 | 1 190 |
| 1 500 | 1500/1700/2000 | 80 x 80 x 2 | 1 550 | 1 710 |
| 2 000 | 1500/1700/2000 | 80 x 80 x 2 | 2 070 | 2 230 |
| Double swing gates | ||||
| 3 000 | 1 200 | 60 x 60 x 2 | 3 070 | 3 190 |
| 3 000 | 1500/1700/2000 | 80 x 80 x 2 | 3 070 | 3 230 |
| 4 000 | 1500/1700/2000 | 80 x 80 x 2 | 4 110 | 4 270 |
| 5 000 | 1500/1700/2000 | 100 x 100 x 3 | 4 930 | 5 130 |
| 6 000 | 2 000 | 100 x 100 x 3 | 5 970 | 6 170 |
| Width mm |
Height mm |
Section gatepost mm |
Free passage mm |
Needed space mm |
|---|---|---|---|---|
| Single swing gate | ||||
| 1 000 | 800 | 60 x 60 x 2 | 1 030 | 1 150 |
| 1 000 | 1 000 | 60 x 60 x 2 | 1 030 | 1 150 |
| 1 000 | 1 200 | 60 x 60 x 2 | 1 030 | 1 150 |
| 1 000 | 1 400 | 80 x 80 x 2 | 1 030 | 1 190 |
| 1 000 | 1 600 | 80 x 80 x 2 | 1 030 | 1 190 |
| 1 000 | 1 800 | 80 x 80 x 2 | 1 030 | 1 190 |
| 1 000 | 2 000 | 80 x 80 x 2 | 1 030 | 1 190 |
| 1 500 | 800 | 60 x 60 x 2 | 1 550 | 1 670 |
| 1 500 | 1 000 | 60 x 60 x 2 | 1 550 | 1 670 |
| 1 500 | 1 200 | 60 x 60 x 2 | 1 550 | 1 670 |
| 1 500 | 1 400 | 80 x 80 x 2 | 1 550 | 1 710 |
| 1 500 | 1 600 | 80 x 80 x 2 | 1 550 | 1 710 |
| 1 500 | 1 800 | 80 x 80 x 2 | 1 550 | 1 710 |
| 1 500 | 2 000 | 80 x 80 x 2 | 1 550 | 1 710 |
| Double swing gates | ||||
| 3 000 | 800/1000/1200 | 60 x 60 x 2 | 3 070 | 3 190 |
| 3 000 | 1400/1600/1800/2000 | 80 x 80 x 2 | 3 070 | 3 230 |
| 4 000 | 1000/1200/1400/1600/1800/2000 | 80 x 80 x 2 | 4 070 | 4 230 |
Select products you would like to include in your tender. Pay attention to select compatible Panels/Rolls & posts system. By clicking on "Generate your tenders" you'll receive a PDF document with detailed description.
If you want to add other products to your tender, you need to create a new configuration. You can manage this on our Tender Tool page.
