Metal Fence PanelsSecurifor 358 Dublo ASTM tested and proven to provide increased forced entry resistance. Additional vertical wires on the reverse of the panel add rigidity and protection.
Benefits:
- The ideal fence for delay of breach attempts.
- Additional vertical wires.
- Imposing barrier and aggressive deterrent.
- Clear view through the fence for CCTV use.
ENSA - Flyer Securifor Dublo - South African assortment
Securifor 358 Dublo features robust wire and weld joints, small mesh apertures, superior fixing mechanisms.
An additional vertical wire welded onto the back of the panel makes it very rigid and resistant to breakthrough attempts.
Ideal for high-risk and remote sites such as electric substations, transformer stations, telecommunication infrastructure, and military & governmental applications.
Note: Securifor 358 Dublo is manufactured in our South African plant. Please check all specifications carefully.
A high-density fence panels with 76.2 mm x 1.7 mm apertures made from 3.96 mm Zincalu Super wires.
Secondary vertical wires on the reverse of the panel add additional security and breakthrough resistance
The small apertures make the fence resistant to attack by traditional hand tools, while also maintaining a good level of visibility through the fence.
South African Market:
A flat cover strip secures all horizontal wires to the post. Stainless steel M8 tamper-proof bolts and shear-off nuts pass through the post to provide maximum resistance against tampering.
Panels made out of Zincalu Super coated wires. Coated with superior PVC Coating
- Anthracite RAL 7016
- Zincalu Super
| Nominal Fence Height (mm) |
Panels Width x Height (mm) | Angle Iron Post | Angle Iron Bottom Rail |
|---|---|---|---|
| Length (mm) | Measurements (mm) | ||
| 2 400 | 2 375 x 3 050 | 3000 | 2996 x 40 x 40 x 3 |
| 3 000 | 2 985 x 3 050 | 3600 | 2996 x 40 x 40 x 3 |
| Securifor 358 Dublo Technical specification | |||
Other heights available on request (MTO)
Access our library of free BIM Objects and download Betafence product drawings in either CAD or Revit format by clicking on the relevant logos.
