GABION STONEWALL
Stone fence wall with invisible posts

Gabion Stonewall is an amazing fencing system with invisible posts, thanks to specific fixations.

Assets:
- Invisible posts
- Rigidity
- Professional but easy installation

Flyer Gabion Stonewall

 

Security:
zincalu

Technical Information

Panels

In order to create your stone fence wall, welded panels are used. These panels are 2000 mm width and are available in several heights from 1600 mm up to 2000 mm.
Small panels complete the system in order to close your wall on each side and on the top. 3 dimensions are existing: 200, 250 and 300 mm (see the assortment table).
Mesh dimension: 50 x 50 mm
Galvanized wire diameter: 4 mm

Posts and "moustache" fixations

A new post system with specific universal "moustache" fixations was developed to erase posts in the wall thickness once stones or any other material are filled in.Posts equipping the system are square, 60x60 mm. "Moustache" fixations will be screwed on them and will maintain panels. Hole pattern allows you to space your panel to the desired wall thickness: 200, 250 or 300 mm. Posts are not drilled, so you can position your "moustache" fixations at your ease. We recommend 6 fixations per post.

Stonewall gabion wall

"Moustache" fixations

Special orders can be registered for posts with a welded base plate. Please consult us.

Coating

Panels are Zincalu® coated. This galvanization method offers a longer lifetime of your fence by 50 % compared to standard heavy galvanization. Posts are hot deep galvanized. This system is only available in this definition. If you look for a coloured polyester coated system, please refer to our Zenturo wall system.

Accessories

Gabion stonewall does not need many accessories to install the system entirely

"Moustache" fixations
Universal panels fixators are hot deep galvanized coated and maintain welded panels to the posts. Fixation number will depend on your fences height, but more generally you will need 6 fixations per post. Fixations will be screwed to the post with self-drilling screws (not supplied by Betafence). We recommend stainless steel hexagonal head screws M4.8 X 19 mm

Spacers
Zincalu coated spacers are mandatory to avoid bending of the panels after infill installation. Spacers length will depend on your stonewall thickness: 200, 250 or 300 mm

Stainless steel Fortinet clips
These are used to attach your side and top panels.

Please refer to our installation video for full details on how to use these accessories.

Sound reduction certification

Gabion Stonewall reduction noise is tested by a certified Laboratory measurement of airborne sound insulation of building elements. This laboratory is accredited by BELAC "The Belgian Accreditation Body", thus reports and certificates issued by BELAC accredited bodies are internationally certified. Tests were conducted by the provisions of the test method ISO 10140-2, in rooms which met the requirements of ISO 10140-5. 

Whereas the Reference values according to ISO 717-1 are between 55 and 60 dB, Gabion stone wall measured values are between 25 and 30 dB at a frequency of 3150 Hz. Do you want to get our full report? Ask your sales office, or send us a request with our contact form.

Panels dimension
W x H mm
Coating Post length to install into concrete* (mm) Fixations needed per intermediate post Fixations needed per start/end post Spacers needed per ML
2000 x 1600 Zincalu 2000 12 (2x6) 9 (6+3) 18
2000 x 1800 Zincalu 2200 12 (2x6) 9 (6+3) 21
2000 x 2000 Zincalu 2400 16 (2x8) 12 (8x4) 24

Upon request, posts with welded base plate are possible.

Width in mm Lenght in mm Coating
200 2000 Zincalu
250 2000 Zincalu
300 2000 Zincalu

How to install our noise reductive Gabion Stonewall?


TOP