GABION WALL ZENTURO
Your design privacy gabion wall

The Zenturo® gabion wall will give a modern look to your space. Be the co-designer of your fence!

Assets:
- Easy installation
- Quality
- Innovative design

 

EN - Flyer Zenturo Wall

Security:
Price index:
Colours:
Betafence guarantee 10 years pes
Available in :
Europe
Betafence Europe
United Kingdom
Betafence UK&I
Americas
Betafence USA
MENA
Betafence MENA
South & Central Africa
Betafence Africa
APAC
Betafence Asia & Oceania

Technical Information

Your Zenturo privacy wall will be created with Zenturo Super panels, rectangular Zenturo posts, and specifics accessories. Zenturo Super panels have narrower meshes than Zenturo, making them ideally suited for gabion walls. In combination with the Zenturo post concept and associated spider fixators, a wide variety of infills can be used to create a personal aesthetic system

Zenturo Super panel specifications

The Zenturo Super panels are flat panels with a double (2D) alternating horizontal wires for added strength.

  • The panels are 2005 mm wide.
  • Mesh sizes: 100 x 50 and 50 x 50 mm
  • Horizontal wire diameter: 5.00 mm
  • Vertical wire diameter: 4.15 mm

Zenturo post specifications

The Zenturo Post is a rectangular tube with a cross-section of 120 x 40 mm and a plate thickness of 2.00 mm.

Accessories

  • Metal spider fixators, hot dip galvanized and polyester plastic coated, is fixed to the post using stainless steel security hexagonal bolts M6 x 40 and stainless steel washers M6 (included in the packaging).
  • Plastic post cap, pre-installed on the post.
  • Specific Zenturo distance holders to prevent the panels from bulging under the weight of the wall infill (wire Ø 2.9 mm)
  • Top Zenturo panel: a small panel (115x1900mm) which ends your wall on the top

Coating technique and colors

The panels are made of galvanized wire, and an adhesion layer is provided for perfect adhesion with the polyester top coat (min. 100 microns). The posts are internally and externally galvanized (min. layer thickness 275g/m², both sides combined) according to Euronorm 10326, after which an adhesion layer is applied and polyester plastic coated (min. 60 microns).

They are available in Anthracite BF7016M. Other colours on request

Installation

A gabion wall blocks all wind!
To avoid damage and injury caused by accidents, always take the following precautions:
1. Evaluate whether the project site is exposed to strong winds. A filled Zenturo® wall of 200 x 200 cm (= maximum panel size) installed with the new post system – withstands a frontal wind load of 120 km / h.
2. Make sure the posts are anchored deep enough in the soil with concrete.
3. Never exceed the maximum wall height: 200 cm.
4. Strictly follow the instructions

Zenturo Super panels height in mm

Zenturo posts length for installation in concrete
in mm

Zenturo posts length in mm for installation with welded base plate Number of inserts per post

655

1100

660  2 x 3

955

1500

960  2 x 4

1255

1700

1260  2 x 5

1555

2000

1560  2 x 6

1705

2400

1710  2 x 6
2005 2700  2010  2 x 7

LIABILITY DISCLAIMER

Betafence's liability is limited to any damage for which and insofar as Betafence could be held liable in accordance with imperative legal stipulations. Direct or indirect

damage (including consequential loss) and/or immaterial damage is / are excluded. Betafence is not liable for any damage caused during or as a result of the

installation, or for any damage due to incorrect or incomplete installation. These products come with an installation guide that can also be found below on this page or on the Betafence Group Youtube Channel. These instructions must be strictly followed. If you do not have the necessary skills to install the products yourself, you are advised to ask a professional for assistance. The Zenturo Super system is part of the Betafence EU Guarantee policy.  

Access our library of free BIM Objects and download Betafence product drawings in either CAD or Revit format by clicking on the relevant logos.


TOP