
Zenturo® Classic is a universal "all-in-one" solution for limitless contemporary fencing and garden decoration concepts. Design your own fence!
Benefits:
- Versatility
- Innovative design
- Easy installation
- Quality
Universality
The Zenturo Classic panel can be used as a fencing panel, for the creation of privacy, as a climbing plant support or as a decorative garden gabion wall. Moreover, unique compatible Zenturo Classic infills are available to give a creative, personal touch to the fence.
Innovative Design
The flat garden panel is very attractive, thanks to its combination of different mesh sizes and double, alternating horizontal wires. The panel is available in standard green, as well as in a fashionable metallic anthracite colour. Other colours are available on demand. The different Zenturo panel infills offer a multitude of attractive configurations!
Easy Installation
The Zenturo Classic panels can be installed with the standard available post systems for residential panels: posts Bekaclip (with collets). Specific tools or experience in the installation are not required!
Quality
The panels are welded out of galvanised wires. Subsequently, they are polyester coated with high adhesion, which guarantees the quality and lifetime.
Applications
The Zenturo concept is specifically developed for residential surroundings. The Zenturo Classic panel can be used as a fencing panel, for the creation of privacy, as a climbing plant support.
The Zenturo Classic panel is a flat panel, with a combination of 3 different mesh sizes: 100x100, 100x50 and 50x50 mm.
The double, alternating horizontal wires offer good rigidity.
The panels have a width of 2005 mm and are available in a range of heights from 655 till 2005 mm.
.Wire diameter of the horizontal wires: 5.00 mm, wire diameter of the vertical wires: 4.15 mm
The Zenturo Classic contemporary fencing can be filled with 2 different, unique & decorative 'infills':
Pixels
For the Zenturo concept, unique 'pixels' have been developed.
These square and rectangular plastic elements perfectly fit into the panel's different mesh sizes: 100x100, 100x50 and 50x50 mm.
The pixels can be easily clicked on the panel and can be used to form numbers, words or patterns on the fence... Available in metallic anthracite.
Flexo Strips
The Zenturo Classic panels can as well be filled with the Flexo Strip.
The flexible plastic strip is available in 2 widths (for mesh widths 50 and 100 mm) and can be woven through the panel's meshes, both in vertical and horizontal direction.
Available on rolls of 50 m (to be cut to length), in green and anthracite
The infills can be used:
Complete your Zenturo design with the Zenturo Super swing gate - available in single or double gate versions. The gates are built with Zenturo super infill i.e. 2 mesh sizes.
Panels are made out of galvanised wires. An adhesion coating is given for a perfect adhesion of the polyester coating (min. 100 microns).
The posts are galvanised inside & out (min. coating 275g/m², both sides together), in accordance with Euro standard 10326. Afterward, an adhesion coating is applied and finally, the posts are PES coated (min. 60 microns).
Metallic Anthracite BF7016M.
Other colours on request.
Fence height in mm |
Size panels W x H in mm |
Height post to be put in concrete* in mm |
Height of post to be put on floorplate in mm |
Bekaclip posts number of collars per post* |
---|---|---|---|---|
655 |
2005 x 655 |
1100 |
700 |
2 |
955 |
2005 x 955 |
1500 |
1100 |
2 |
1255 |
2005 x 1255 |
1700 |
1300 |
3 |
1555 |
2005 x 1555 |
2000 |
- |
3 |
1705 |
2005 x 1705 |
2300 |
- |
4 |
2005 |
2005 x 2005 |
2500 |
- |
4 |
* only for installation of the Zenturo panel as a standard, straight fence, with posts in concrete. / For installation on a slope, with infills or as a gabion wall, please consult the installation manual and refer to Zenturo gabion wall page.
Pixels width x length mm |
Flexo Strips width x roll length mm x m |
---|---|
100 x 100 | 44 x 100 |
100 x 50 | 94 x 50 |
50 x 50 | - |
Metallic anthracite | Anthracite |
Access our library of free BIM Objects and download Betafence product drawings in either CAD or Revit format by clicking on the relevant logos.