Betafence Corporate - Securing what matters Betafence Corporate - Securing what matters Bekafix

BEKAFIX
Universal shaped post for panels and decorative railings

Profiled posts, polyester coated on galvanised with fixing system to be used with all Nylofor® panels. 

Assets: 
- Easy and fast installation
- Patented design
- Can be used with all fence panels
- Very convenient for installation on slopes (25mm steps possible)
- Large accessories range

 

flyer Bekafix posts

 

Colors:
Betafence guarantee 10 years pes

Technical Information

Profile

  • Bekafix are tubular posts, profiled in "H" shape, plate thickness: 1.25 mm
  • With 3 pre-drilled holes for fixing of the special metal security clips with bolts
  • With punched holes for positioning and fixing of the panels by means of fixing clips
  • Cross section of the post: 70 x 44 mm
  • I/V: 5,28 cm³
  • Cap with a hook to support panels during installation. Optional caps without a hook, for CreaZen panels

Accessories

  • Security fixation system: plastic coated metal clip with as an option stainless bolt and break-off head nut
  • Metal or polyamide fixing brackets
  • Bekafix installation tongs
  • Floor plate
  • Connection piece to create a bent arm for panels
  • Single or double bent arms
  • Specific caps without hook for CreaZen panels

Base plates & Installation

Our Bekafix posts can easily be combined with PVC/Concrete plates installed below your panel, and thus without additional accessories. Check with the enclosed document the plate dimensions we recommend.
Base plate compatibility
It is important to check that water is not able to infiltrate or remain inside the pole.

Coating technique and colors

Coating

Galvanized: inside and outside and polyester coated (minimum 60 microns)

Colours

Green RAL 6005 - Anthracite RAL 7016
Other colours are available on request.

Panel height
mm		 Post length
mm		 Number of fixators per post
(intermediate/corner post*)
  Concrete Baseplate  
630 1 075 675 2 x 2
830 1 275 - 2 x 2
1 030 1 475 1 075 2 x 2
1 230 1 675 1 275 2 x 3
1 430 1 975 - 2 x 3
1 530 1 975 1 575 2 x 3
1 630 2 175 1 675 2 x 3
1 730 2 175 1 775 2 x 3
1 830 2 475 1 875 2 x 4
1 930 2 475 1 975 2 x 4
2 030 2 575 2 075 2 x 4
2 230 2 775 - 2 x 4
2 430 3 175  2 475 2 x 4

end post = only half of the numbers of fixators necessary