
The "indispensable" gate
Robusta® SC cantilever sliding doors are easy to install, even in the most difficult conditions.
Assets:
- Large execution range
- Safety, robust construction and proven reliability
- External FAAC gate operator
- Plug and play for motorized versions
EN - Flyer Robusta SC Sliding Gate
Our Robusta SC cantilever sliding gates are available with following executions :
All of our cantilever sliding doors are supplied with a guiding post and lock post in single or double version. The post baseplate is built in order to receive the motor on.
Configuration depends on your gate dimension and configuration. Please see table below for further details.
Your sliding gate can be motorized with 2 different motors, depending on your use:
- Normal use: 500 line = FAAC Motor 746ER --> Only possible on gates R2000 up to 9 meters width
- Intensive use: 1000 Line = FAAC Motor 844 --> All widths can be equipped with this motor
Check out the full specifications of the motorization and its safety equipment in the specifications tab.
Motorised versions of your cantilever sliding gate can be :
Deadman key version 500 line, which comprises the FAAC motor, its control logic and a key switch requiring no other safety devices on the gate. This is the economic version of the motorized gate.
or
Fully automatic version 500 line or 1000 line which also comprises the FAAC motor and its control unit and :
- 3 active pressure strips: contact with the pressure strips automatically reverses the movement of the gate,
- 2 sets of photocells: the passage of the gate is monitored by two pairs of photocells as it closes. Activation will automatically reverse the movement of the gate.
- 2 remote controls: these are 2 channels and the system can accept up to 128 remote controls
- 1 warning light: a warning light is on when the gate is opening/closing
Robusta gates are CE marked according to the European regulation: Construction products regulations (CPR) (EU-305/2011) and type tested according to standard EN 13241-1 for industrial, commercial, garage doors and gates.
Robusta SC sliding gates are protected by the best coating process currently available: galvanizing inside and out (min. thickness 275 g/m², 2 sides combined), followed by a polyester coating (min. thickness of the layer: 100 microns).
Other colors on request.
Type | R2000 | R2800 |
---|---|---|
Free passage (height from 1000 to 2400 mm) |
3 000 mm to 9 000 mm | 8 000 to 12 000 mm |
Available versions |
Manual |
Manual Motorisable Motorized (Dead man key and/or full automatic) |
Gate wing construction | ||
Underbeam | 200x160x5 mm | 280x200x5 mm |
Frame | 80x60x3 mm | 100x100x3 mm: horizontal 100x80x3mm: vertical |
Tubular infill (standard) | 25x25x1.5 mm | 30x30x1.5 mm |
Distance between bars (max) | 110 mm | 105 mm |
Locinox key lock | Only for the manual gate | Only for the manual gate |
Optional infill | ||
Nylofor 2D Super / Nylofor F panels | Optional | Optional |
Guiding post | Manual, motorisable and motorised | Manual and motorisable and motorised |
Type | Single post bridge (Double possible as an option except for motorisable & motorised) |
Double post bridge |
Dimensions if height is less than 2 meters | 120x80x3 mm | 120x80x3 mm --> Manual or motorisable |
Dimensions if height equal or greater than 2 meters | 120x120x3 mm and all heights from 8 meters | 120x120x3 mm --> Manual or motorisable |
200 x 100 x 4 mm --> motorized | ||
Inspection Hatch | Motorisable version only | Motorisable version only |
Lock post | Manual version | |
Type | Post in line | Post in line |
Dimensions | 120x120x3 mm | 120x120x3 mm |
End post or post bridge | Motorisable and motorized versions | |
Types | Double post bridge | Double post bridge |
Dimensions | 120x80x3mm | 120x120x3 mm |
Inspection hatch | On motorisable version only | On motorisable version only |
Gear rack on motorisable and motorized versions only | ||
Module | 4 | 4 |
Material | Steel-reinforced PA6 | Steel-reinforced PA6 |
Pre-installed | Yes | Yes |
MOTORIZED GATES SPECIFICATIONS | |||
---|---|---|---|
R2000 | R2800 | ||
500 Line | 1000 Line | 1000 Line | |
Use | Normal(1) | Intensive | Intensive |
FAAC motorisation type | 746ER | 844 | 844 |
Controller reference | 780 D | ||
Number of photocells | 2 sets | ||
Photocell heights (hardwired) | 180 and 900 mm | ||
Pressure strips | Active A50 | ||
Number of pressure strips on the guiding post | 2 | ||
Gate wing head pressure strip | Active | ||
Pressure strip on beam at the rear of the gate wing | Not possible | ||
Warning light | 1 | ||
Area lighting | Optional | ||
Number of 2 channels remote-controls supplied | 2 | ||
Number of controls available for dry contacts | 2 |
(1) Normal use: max. 50 cycles per day
Beam Dimension |
Width |
Height |
Free passage |
Free passage mm Motorizable version |
Free passage mm Motorized version |
Total needed space mm |
Gate height |
Wing |
Post bridge height |
---|---|---|---|---|---|---|---|---|---|
R2000 |
3000 |
1000 |
3232 | 3187 | 3187 | 8058 |
1072 |
967 |
1208 |
R2000 |
3000 |
1200 |
3232 | 3187 | 3187 | 8058 |
1272 |
1167 |
1408 |
R2000 |
3000 |
1500 |
3232 | 3187 | 3187 | 8058 |
1572 |
1467 |
1708 |
R2000 |
3000 |
1700 |
3232 | 3187 | 3187 | 8058 |
1772 |
1667 |
1908 |
R2000 |
3000 |
2000 |
3232 | 3187 | 3187 | 8058 |
2072 |
1967 |
2208 |
R2000 |
3000 |
2400 |
3232 | 3187 | 3187 | 8058 |
2472 |
2367 |
2608 |
R2000 |
4000 |
1000 |
4177 | 4132 | 4132 | 10 271 |
1072 |
967 |
1208 |
R2000 |
4000 |
1200 |
4177 | 4132 | 4132 | 10 271 |
1272 |
1167 |
1408 |
R2000 |
4000 |
1500 |
4177 | 4132 | 4132 | 10 271 |
1572 |
1467 |
1708 |
R2000 |
4000 |
1700 |
4177 | 4132 | 4132 | 10 271 |
1772 |
1667 |
1908 |
R2000 |
4000 |
2000 |
4177 | 4132 | 4132 | 10 271 |
2072 |
1967 |
2208 |
R2000 |
4000 |
2400 |
4177 | 4132 | 4132 | 10 271 |
2472 |
2367 |
2608 |
R2000 |
5000 |
1000 |
5122 | 5077 | 5077 | 12 298 |
1072 |
967 |
1208 |
R2000 |
5000 |
1200 |
5122 | 5077 | 5077 | 12 298 |
1272 |
1167 |
1408 |
R2000 |
5000 |
1500 |
5122 | 5077 | 5077 | 12 298 |
1572 |
1467 |
1708 |
R2000 |
5000 |
1700 |
5122 | 5077 | 5077 | 12 298 |
1772 |
1667 |
1908 |
R2000 |
5000 |
2000 |
5122 | 5077 | 5077 | 12 298 |
2072 |
1967 |
2208 |
R2000 |
5000 |
2400 |
5122 | 5077 | 5077 | 12 298 |
2472 |
2367 |
2608 |
R2000 |
6000 |
1000 |
6202 | 6157 | 6157 | 14 788 |
1072 |
967 |
1208 |
R2000 |
6000 |
1200 |
6202 | 6157 | 6157 | 14 788 |
1272 |
1167 |
1408 |
R2000 |
6000 |
1500 |
6202 | 6157 | 6157 | 14 788 |
1572 |
1467 |
1708 |
R2000 |
6000 |
1700 |
6202 | 6157 | 6157 | 14 788 |
1772 |
1667 |
1908 |
R2000 |
6000 |
2000 |
6202 | 6157 | 6157 | 14 788 |
2072 |
1967 |
2208 |
R2000 |
6000 |
2400 |
6202 | 6157 | 6157 | 14 788 |
2472 |
2367 |
2608 |
R2000 |
7000 |
1000 |
7282 | 7237 | 7237 | 17 093 |
1072 |
967 |
1208 |
R2000 |
7000 |
1200 |
7282 | 7237 | 7237 | 17 093 |
1272 |
1167 |
1408 |
R2000 |
7000 |
1500 |
7282 | 7237 | 7237 | 17 093 |
1572 |
1467 |
1708 |
R2000 |
7000 |
1700 |
7282 | 7237 | 7237 | 17 093 |
1772 |
1667 |
1908 |
R2000 |
7000 |
2000 |
7282 | 7237 | 7237 | 17 093 |
2072 |
1967 |
2208 |
R2000 |
7000 |
2400 |
7282 | 7237 | 7237 | 17 093 |
2472 |
2367 |
2608 |
R2000 or R2800 |
8000 |
1000 |
8092 | 8047 R2000 8007 R2800 |
8047 R2000 8007 R2800 |
19 193 |
1072 |
967 |
1208 |
R2000 or R2800 |
8000 |
1200 |
8092 | 8047 R2000 8007 R2800 |
8047 R2000 8007 R2800 |
19 193 |
1272 |
1167 |
1408 |
R2000 or R2800 |
8000 |
1500 |
8092 | 8047 R2000 8007 R2800 |
8047 R2000 8007 R2800 |
19 193 |
1572 |
1467 |
1708 |
R2000 or R2800 |
8000 |
1700 |
8092 | 8047 R2000 8007 R2800 |
8047 R2000 8007 R2800 |
19 193 |
1772 |
1667 |
1908 |
R2000 or R2800 |
8000 |
2000 |
8092 | 8047 R2000 8007 R2800 |
8047 R2000 8007 R2800 |
19 193 |
2072 |
1967 |
2208 |
R2000 or R2800 |
8000 |
2400 |
8092 | 8047 R2000 8007 R2800 |
8047 R2000 8007 R2800 |
19 193 |
2472 |
2367 |
2608 |
R2000 or R2800 |
9000 |
1000 |
9172 | 9127 R2000 9087 R2800 |
9127 R2000 9087 R2800 |
21 948 |
1072 |
967 |
1208 |
R2000 or R2800 |
9000 |
1200 |
9172 | 9127 R2000 9087 R2800 |
9127 R2000 9087 R2800 |
21 948 |
1272 |
1167 |
1408 |
R2000 or R2800 |
9000 |
1500 |
9172 | 9127 R2000 9087 R2800 |
9127 R2000 9087 R2800 |
21 948 |
1572 |
1467 |
1708 |
R2000 or R2800 |
9000 |
1700 |
9172 | 9127 R2000 9087 R2800 |
9127 R2000 9087 R2800 |
21 948 |
1772 |
1667 |
1908 |
R2000 or R2800 |
9000 |
2000 |
9172 | 9127 R2000 9087 R2800 |
9127 R2000 9087 R2800 |
21 948 |
2072 |
1967 |
2208 |
R2000 or R2800 |
9000 |
2400 |
9172 | 9127 R2000 9087 R2800 |
9127 R2000 9087 R2800 |
21 948 |
2472 |
2367 |
2608 |
R2800 | 10 000 | 1000 | 10 216 | 10 171 | 10 131 | 23 915 | 1072 | 967 | 1208 |
R2800 | 10 000 | 1200 | 10 216 | 10 171 | 10 131 | 23 915 | 1272 | 1167 | 1408 |
R2800 | 10 000 | 1500 | 10 216 | 10 171 | 10 131 | 23 915 | 1572 | 1467 | 1708 |
R2800 | 10 000 | 1700 | 10 216 | 10 171 | 10 131 | 23 915 | 1772 | 1667 | 1908 |
R2800 | 10 000 | 2000 | 10 216 | 10 171 | 10 131 | 23 915 | 2072 | 1967 | 2208 |
R2800 | 10 000 | 2400 | 10 216 | 10 171 | 10 131 | 23 915 | 2472 | 2367 | 2608 |
R2800 | 11 000 | 1000 | 11 431 | 11 386 | 11 346 | 26 500 | 1072 | 967 | 1208 |
R2800 | 11 000 | 1200 | 11 431 | 11 386 | 11 346 | 26 500 | 1272 | 1167 | 1408 |
R2800 | 11 000 | 1500 | 11 431 | 11 386 | 11 346 | 26 500 | 1572 | 1467 | 1708 |
R2800 | 11 000 | 1700 | 11 431 | 11 386 | 11 346 | 26 500 | 1772 | 1667 | 1908 |
R2800 | 11 000 | 2000 | 11 431 | 11 386 | 11 346 | 26 500 | 2072 | 1967 | 2208 |
R2800 | 11 000 | 2400 | 11 431 | 11 386 | 11 346 | 26 500 | 2472 | 2367 | 2608 |
R2800 | 12 000 | 1000 | 11 971 | 11 926 | 11 886 | 27 270 | 1072 | 967 | 1208 |
R2800 | 12 000 | 1200 | 11 971 | 11 926 | 11 886 | 27 270 | 1272 | 1167 | 1408 |
R2800 | 12 000 | 1500 | 11 971 | 11 926 | 11 886 | 27 270 | 1572 | 1467 | 1708 |
R2800 | 12 000 | 1700 | 11 971 | 11 926 | 11 886 | 27 270 | 1772 | 1667 | 1908 |
R2800 | 12 000 | 2000 | 11 971 | 11 926 | 11 886 | 27 270 | 2072 | 1967 | 2208 |
R2800 | 12 000 | 2400 | 11 971 | 11 926 | 11 886 | 27 270 | 2472 | 2367 | 2608 |
Select products you would like to include in your tender. Pay attention to select compatible Panels/Rolls & posts system. By clicking on "Generate your tenders" you'll receive a PDF document with detailed description.
If you want to add other products to your tender, you need to create a new configuration. You can manage this on our Tender Tool page.