ROBUSTA SR SLIDING GATE
Motorized or manual opening on a rail

The "indispensable" gate on rail

Robusta® bottom track sliding gates have proper guiding posts bridge, a rail with accessories and a closing posts bridge with a lock.

Assets
- Security of operation
- Robust construction
- Large execution range
- Proven reliability

 

EN - Flyer Robusta SR Sliding gate

Colours:
Betafence guarantee 10 years pes
Available in :
Europe
Betafence Europe
United Kingdom
Betafence UK&I
Americas
Betafence USA
MENA
Betafence MENA
South & Central Africa
Betafence Africa
APAC
Betafence Asia & Oceania

Technical Information

Benefits

Safety
The distance between the vertical bars is 110mm, to prevent climbing through.

Complete System
The on-rail sliding gate can easily be used in conjunction with Robusta swing gates and the Betafence fencing systems.

Harmony
Robusta gates completely harmonized with all styles of architecture.

Security of Operation
Robusta gates are extremely rigid due to their section and the welded construction.

Pre-assembled
Robusta on-rail sliding gates are fully pre-assembled at the factory to ensure a quick and smooth installation on site.

Possible executions

  • Manual gate: designed for manual operation and will be fitted with a Locinox Key-operated lock.
  • Motorisable gate: designed for the subsequent installation of a motor. A gear rack is installed or supplied according to the width of the gate, and inspection plates are provided.
  • Robusta motorisation is possible through collaboration with FAAC. Easy installation and connection are guaranteed. Specific executions on demand.
  • Robusta motorisation - dead man key version: a gate with external motorisation, without safety devices and with a key switch. The lock post is always double-sided.
  • Robusta motorisation - full automatic version: a gate with external motorisation. The motorized sliding gate is fully equipped and fitted with a motor. Once connected, your gate will be immediately ready to operate.

Guiding post

Guiding post with bridge type and upper guiding. Profile section of the post is 120 x 80 x 3 mm, 120 x 120 x 3 mm if height is bigger than 2 meters or if the length of the gate wing is 8 or 9 meters. Double-sided guiding ost is available as an option up to 9 meters and is standard from 9 meters onwards.

Rails: 
The standard rails are to be poured into the foundation. Can be reinforced by sliding in Ø12 mm round iron. Intensive passage of heavy traffic. Alternative can be I-iron (IPE80) with round iron Ø18 mm welded on top.

Gate wing

Frame constructed with an under beam 150x100x3 mm (> 3 meters to 9 meters), and 200x100x4 mm (>10 to 14 meters). The welded frame of 60 x 60 x 2 mm up to 9 meters and 100 x 100 x 3 mm from 9 to 14 meters. Bars infill are 25 x 25 x 1.5 mm, welded under 45° with a distance of 110 mm between the bars. Provided with an externally adjustable lock for the manual version (European cylinder 54 mm - 27/27). Dental strip for security available as an option from 2 meters hight onwards.

CE marked

Robusta manual and motorized sliding gates are CE marked according to the European regulation: construction products regulations (CPR) (EU-305/2011) and type tested according to standard en 13241-1 for industrial, commercial, garage doors and gates.

Coating technique and colours

  • Coating

Robusta manual and motorized sliding gates are treated with the best coating techniques existing today: galvanized in and outside (minimum 275g/m², two sides combined). Finally, the gates are polyester coated (min. 100 microns).

  • Colours

In total, Betafence offers six standards and one classic color (metallic coating).
Other colors are available on request.

Type Rail 1500 Rail 200
Free passage
Heights from 1.00 to 2.40 meters
3 to 9 meters > 9 to 14 meters
3 Executions possibilities Manual
Motorisable
Motorised (dead man key or full automatic)
Gate Wing Construction
Underbeam 150 x 100 x 3 mm 200 x 100 x 4 mm
Frame 60 x 60 x 2 mm 100 x 100 x 3 mm
Tubular infill (standard) 25 x 25 x 1.5 mm
Middle profile - 100 x 100 x 3 mm
Upper profile 60 x 60 x 2 mm 100 x 100 x 3 mm
Distance between bars Max. 110 mm
Guiding post
Type Single post (double optional) Double post
Dimensions if height < 2 meters 120 x 80 x 3 mm
Dimensions if height ­equal or > 2 meters
If length is equal or > 8 meters
120 x 80 x 3 mm
120 x 120 x 3 mm
120 x 80 x 3 mm
Visit hole For motorisable and motorised execution only
End post for manual execution
Type In line 120 x 120 x 3 mm
End post for motorisable and motorised execution
Type
 
Single post 120 x 80 x 3 mm or 120 x 120 x 3 mm if height equal or >2 meters or length from 8 to 9 meters Double post 120 x 80 x 3 mm
Dental rack for motorisable and motorised execution only
Module 4
Material Steel reinforce PA6
Pre-installed Yes No

 

  Model 500 line Model 1 000 Line
Motor Faac 746 ER Z16 Faac 844 ER Z16
Power supply (VAC + 6 % - 10% 50-60 Hz) 230
Absorbed power (W) 300 650
Reduction ratio 1:30
Type of pinion Z16
Rack Module 4
Max. thrust (daN) 62.5 (Z16) 110 (Z16)
Winding thermal protection (°c) 120
Type of oil FAAC HP Oil
Operating ambient temperatur (°c) -20 +55
Gear motor weight (incl. oil) 14 Kg 14.5 Kg
Protection class IP44
Gate max. weight 600 Kg (Z16) 1800 Kg (Z16)
Gate speed (m/min) 9.5 (Z16)
Clutch Twin-disk in oil bath
Controler 780 D
Limit-switch Magnetic
Application Intensive use, 70 % use frequency
Access control
Free dry contact 2
Receiver Remote Control (2 supplied) 866 MHz
Safety
Photocells 2 sets (180 & 900 mm)
Safety strip on top of the wing Active
Safety strip on reception post 2 active 4 active
Safety strip on guiding post 2 2
Warning Lamp 230 Volts

 

Commercial
width
mm

Commercial
height
mm

Height
from
fondation
mm

Wing
height
mm

Post height
from fondation
mm

Wing 
width 
(incl. 'tail')

Opening
with EP
in line

Opening 
with EP
not in line

Needed space
EP in line

Needed space 
EP not in line

3000

1200

1272

1235

1408

3875

3000

2900

7280

7280

1500

1572

1535

1708

1700

1772

1735

1908

2000

2072

2035

2208

2400

2472

2435

2608

4000

1200

1272

1235

1408

4890

4050

3900

9350

9300

1500

1572

1535

1708

1700

1772

1735

1908

2000

2072

2035

2208

2400

2472

2435

2608

5000

1200

1272

1235

1408

5905

5050

4900

11350

11300

1500

1572

1535

1708

1700

1772

1735

1908

2000

2072

2035

2208

2400

2472

2435

2608

6000

1200

1272

1235

1408

6920

6050

5950

13370

13370

1500

1572

1535

1708

1700

1772

1735

1908

2000

2072

2035

2208

2400

2472

2435

2608

7000

1200

1272

1235

1408

7395

7050

6950

15390

13590

1500

1572

1535

1708

1700

1772

1735

1908

2000

2072

2035

2208

2400

2472

2435

2608

8000

1200

1272

1235

1408

8950

8100

7950

17460

1740

1500

1572

1535

1708

1700

1772

1735

1908

2000

2072

2035

2208

2400

2472

2435

2608

Commercial
width
mm

Commercial
height
mm

Height
from
fondation
mm

Wing
height
mm

Post height
from fondation
mm

Wing 
width 
(incl. 'tail')

Opening
with EP
in line

Opening 
with EP
not in line

Needed space
EP in line

Needed space 
EP not in line

9000

1200

1272

1235

1408

9965

9100

8950

19460

19410

1500

1572

1535

1708

1700

1772

1735

1908

2000

2072

2035

2208

2400

2472

2435

2608

10000

1200

1272

1235

1408

11060

10100

10000

21560

21560

1500

1572

1535

1708

1700

1772

1735

1908

2000

2072

2035

2208

2400

2472

2435

2608

11000

1200

1272

1235

1408

12075

11150

11000

23630

23580

1500

1572

1535

1708

1700

1772

1735

1908

2000

2072

2035

2208

2400

2472

2435

2608

12000

1200

1272

1235

1408

13090

12150

12000

25630

25680

1500

1572

1535

1708

1700

1772

1735

1908

2000

2072

2035

2208

2400

2472

2435

2608

13000

1200

1272

1235

1408

14105

13150

13050

27650

27650

1500

1572

1535

1708

1700

1772

1735

1908

2000

2072

2035

2208

2400

2472

2435

2608

14000

1200

1272

1235

1408

15120

14150

14050

29670

29670

1500

1572

1535

1708

1700

1772

1735

1908

2000

2072

2035

2208

2400

2472

2435

2608

Select products you would like to include in your tender. Pay attention to select compatible Panels/Rolls & posts system. By clicking on "Generate your tenders" you'll receive a PDF document with detailed description.

Processing download, please wait..

If you want to add other products to your tender, you need to create a new configuration. You can manage this  on our Tender Tool  page.

Our references with our Robusta SR motorized sliding gate


TOP